l Broad-spectrum, long-lasting sterilization, effective against bacteria, molds and yeasts.
l Do not add any organic solvents, halogenated organic compounds, formaldehyde emitters or divalent metal ions.
l It can be used in a wide range of pH range from 2.0 to 10.0.
l Easily soluble in water, most lower alcohols and glycols.
l The solvent used does not interfere with the reagent reaction system and is compatible with key enzymes (Enzymes).
l Will not inhibit antibody binding
l Does not accumulate in the environment and is easily degraded
Physical property
| Exterior |
Yellow transparent solution |
| Active ingredient |
5% |
| PH value |
8.0-9.5 |
| Density（g/ml） |
1.02-1.04 |
Matters needing attention
l The recommended concentration is 0.04-0.2%, and the appropriate dosage should be selected according to the applied product and the environmental conditions of use.
l This product should avoid direct contact with eyes. Once contacted, rinse immediately with plenty of water without delay. Do not contact the skin for a long time
l Note that the temperature, pH value and redox potential when adding will not affect the stability of this product.
l Store in the original container and avoid extreme temperatures. Easy to frost and may crystallize when the temperature is lower than 1℃. However, if heated to 50°C at most, any crystals formed will dissolve again without affecting the performance.
中文
